Configuration
snmp-server contact jeremy@jeremysitlab.com
-> Optional informationsnmp-server community Jeremy1 [ro | rw]
Configure the SNMP community strings (passwords).ro = read only -> no Set messages
rw = read/write -> can use Set messages
snmp-server host 192.168.1.1 version 2c Jeremy1
-> Specify the NMS, version, and community.snmp-server enable traps snmp linkdown linkup
andsnmp-server enable traps config
-> Configure the Trap types to send to the NMS.
In SNMPv1 and SNMPv2c, there is no encryption!
The community and message contents are sent in plain-text. This is not secure, as the packets can easily be captured and read.
Last updated