Manual Time Configuration
You can manually configure the time on the device with the clock set
command.
Although the hardware calendar (built-in clock) is the default time-source, the hardware clock and software clock are separate and can be configured separately.
Hardware Clock (Calendar) configuration
You can manually configure the hardware clock with the calendar set
command.
Typically you will want to synchronize the 'clock' and 'calendar'. Use the command...
...
clock update-calendar
to sync the calendar to the clock's time....
clock read-calendar
to sync the clock to the calendar's time.
Configure the Time Zone
You can configure the time zone with the clock timezone
command.
Daylight Saving Time
Last updated