Layer 3 EtherChannel

Commands

Configures the EtherChannel load-balancing method on the switch.

SW(config)# port-channel load-balance <mode>

Displays information about the load-balancing settings.

SW# show etherchannel load-balance

Configures an interface to be part of an EtherChannel

SW(config-if)# channel-group <number> mode {desirable|auto|active|passive|on}

Displays a summary of EtherChannel on the switch

SW# show etherchannel summary

Displays information about the virtual port-channel interfaces on the switch

SW# show etherchannel port-channel